Tech Pack Room · guide 02
Size Grading
One sample. A whole size run.
Grading turns your approved sample size into every other size, with a fixed step for each measuring point. Get the steps right and every size fits like the sample. Get them wrong and your XL looks like it came from another brand.
Four words to know
The Basics
Every size chart is built from these.Learn them once and you can read any factory’s grading.
- 01
Base size
The size you sample and fit first, usually M for adults. Every other size is worked out from it, so it has to be right before anything else.
- 02
Grade rule
How much one measuring point changes from one size to the next. Chest might move 2.5 cm (half measurement) per size; a neck rib doesn’t move at all.
- 03
Jump
The change between two neighbouring sizes, also called a step. Most ranges keep the same jump from the smallest size to the biggest.
- 04
Break point
The size where the jump changes: 2.5 cm per size up to XL, then 3 cm to XXL and beyond. Extended and plus sizes almost always have one.
What grades, what doesn’t
The Moves
Widths move most. Details don’t move at all.Five rules of thumb that keep a size run in proportion.
- Widths move most. Chest, waist, hip and bottom width usually grow 2 to 3 cm per size in half measurements on adult ranges.
- Lengths move less. Body length 1 to 2 cm per size, sleeve 0.5 to 1.5 cm. Many trousers keep one inseam for every size, or sell it in lengths.
- Details stay put. Rib and hem heights, label sizes and most trims don’t grade. Prints may grade in two or three steps for the biggest sizes; say so in the tech pack.
- Fit is not a grade. An oversized fit grades like a regular one; it simply starts from bigger base measurements. Doubling the jumps doesn’t make it oversized, it makes the big sizes wrong.
- Pick one system. European, American, British and Asian ranges use different base sizes and jumps. Choose one for your brand and keep every style on it.
A regular-fit tee, S to XXL, base size M
On Paper
Thirteen points, one jump each.The letters match the tee in the points of measure guide. Example numbers to learn from, not a standard to copy.
| Point (cm) | Jump | S | M · base | L | XL | XXL |
|---|---|---|---|---|---|---|
| ABody length | 2 | 70 | 72 | 74 | 76 | 78 |
| BChest width (1/2) | 2.5 | 50.5 | 53 | 55.5 | 58 | 60.5 |
| CBottom width (1/2) | 2.5 | 50.5 | 53 | 55.5 | 58 | 60.5 |
| DShoulder width | 1.5 | 45.5 | 47 | 48.5 | 50 | 51.5 |
| EArmhole, straight | 1 | 22 | 23 | 24 | 25 | 26 |
| FSleeve length | 1 | 20 | 21 | 22 | 23 | 24 |
| GBicep (1/2) | 1 | 18.5 | 19.5 | 20.5 | 21.5 | 22.5 |
| HSleeve opening (1/2) | 0.5 | 16.5 | 17 | 17.5 | 18 | 18.5 |
| INeck width | 0.5 | 18 | 18.5 | 19 | 19.5 | 20 |
| JFront neck drop | 0.5 | 8.5 | 9 | 9.5 | 10 | 10.5 |
| KBack neck drop | 0 | 2 | 2 | 2 | 2 | 2 |
| LNeck rib height | 0 | 2 | 2 | 2 | 2 | 2 |
| MHem height | 0 | 2 | 2 | 2 | 2 | 2 |
Read it across: M is the sample, each size up adds the jump, each size down takes it away. The last three rows are details, so they stay at 2 cm in every size.
Free tool · nothing to sign up for
The Grader
Your base size in, every size out.Start from a tee, a hoodie or trousers, change any number, add a break point, then copy the chart into Excel or your tech pack.
Your rules
| Point | Base (cm) | Jump | Jump after break | Remove |
|---|
Your size chart
Starting numbers are examples, not a standard. Widths marked 1/2 are half measurements. Want it in a full tech pack? .
Before you send it
Check It
Six checks on any graded chart.Yours, ours or a factory’s. Two minutes now saves a sample round later.
- The base size column matches the approved fit sample, point for point.
- Every row moves one way, smoothly: no size is smaller than the size below it.
- The jumps are steady, or change only at a break point you chose on purpose.
- Widths and lengths stay in proportion. A size that grows 3 cm wider and 0 cm longer will look boxy.
- The points that shouldn’t grade, don’t: rib, hem and label sizes.
- Half and full measurements are never mixed in one chart, and the names say which.
Then ask for a size set before bulk: one sample in each size, or at least the smallest and the biggest, to see the grading hold on real garments.
Straight answers
Time Out
Grading or size chart: what’s the difference?
The size chart is the result: every point, every size. Grading is the method: the rules that turn your base size into all the others.
Which size should be my base?
The middle of your range, and the size your fit model wears. For most adult ranges that is M.
Do I need a fit model?
It helps. The base size is fitted on a real person before anything is graded. No fit model? Fit on a body form and on someone close to your customer.
Can you grade my existing pattern?
Yes. Send the pattern, as a DXF file or on paper, with your size range. Our pattern team grades it and sends the chart back for your approval.
How many sizes should I make?
The sizes you will actually sell. S to XL covers most first drops; add XS and XXL once you know who buys.
What is a size set?
One sample in each size, or at least the smallest and the biggest, made before bulk to check that the grading holds. Worth asking for on bigger orders.
Keep studying
More from the Tech Pack Room
- 01Guide
Points of measure
Where the tape goes on a tee, a hoodie and joggers.
- 02Guide + grader
Size grading
One sample size into a full run, with a free grader.
- 03Guide + template
Bill of materials
Every fabric, trim, label and bag, on one sheet.
- 04Template
Tech pack
Nine pages, fillable on screen, with a worked example.
Ready when you are
Your Move.
Your first run starts at 50 pieces, with a sample in 8–21 working days. Send us the pack, or just the idea.
- We reply within 24 hours
- We work under NDA
- We ship worldwide